Introduction
Installation is very straight forward. The laser cut and CNC formed bracket attaches to the tray located above the dash using four machine screws, included in the hardware kit. The four .25" holes used must be drilled by the user in the OEM tray. Should you choose to return to stock, the OEM rubber mat inside the tray conceals the holes.
NOTE: If you happen to break a plastic factory clip during install, no worries, we've got you covered. Send us an email at support@builtrightind.com and we will get you squared away.
Install Time & Difficulty
30 - 45 minutes
Medium
Tools
7mm Socket and Ratchet
3/8" Wrench
Phillips head screw driver
Trim tool (optional)
Painter's tape (optional)
Comments
0 comments
Please sign in to leave a comment.