Follow along in our below linked install guide for the installation of the 102604 panel. Installation is covered in a segment of this video. If you have any questions, please contact us.
Install Time & Difficulty
10 - 15 minutes per panel
1/16in Allen Wrench
5/32in Allen Wrench
1. The first step is to pull out the rear subfloor, which requires removing each of the rear tie downs.
2. Then, the lower brackets slip under the rear tie down locations.
3. The subfloor is replaced and then the tie downs are reinstalled.
4. Then, simply loosen the two upper mounting bolts, slip the panel into place, install the two lower mounting bolts and then snug up the top.
Video Install Guide