Follow along in our below linked install guide for the installation of the 102073 panel. Installation is covered in a segment of this video. If you have any questions, please contact us.
The installation for the RAM 4th gen bedside racks have changed a bit based on customer feedback. The aluminum 'dogbone' mounts have been replaced by spacers to provide more room for error during drilling. See our written installation guide (link below) for complete details.
Install Time & Difficulty
60 - 90 minutes
3/8” Socket and Wrench
5mm Allen Key
Flat head screw driver for prying
Impact driver or power drill
3/8” drill bit
Smaller drill bit for pilot hole
Exacto or Utility Knife
Rivet nut installation tool (optional)
Painters Tape (optional)
Please click the following link for a .pdf of latest version of this installation.
Video Install Guide
Note, this installation has changed slightly since the video was filmed, based on feedback from customers. The above PDF is the most up to date version of the installation instructions.