105023 | Elastic Tech Panel Clips (Web Dominators) - Coyote Tan | 8pc Kit

Introduction

Installation of the Web Dominators is about as easy as it gets. You'll be securing flashlights, cords, knives, corn dogs, G.I. Joes, Barbies, or whatever you can think of (well, that will fit in a roughly 2" diameter opening) in no time!

Install Time & Difficulty

1 minute

E-z peasy

Tools

Fingers

Hands

Eyes

Installation 

Begin by identifying the row of MOLLE you wish to install the web dominator onto. Slide the web dominator with the narrow side (without the shock cord) through first, making sure the front lip is angled upwards.

While sliding into MOLLE opening, route the MOLLE webbing into the tangs on the web dominator so that the webbing comes from underneath, routed over the middle, and then back downwards.

Push the web dominator all the way in and feed the remaining webbing into the front of the web dominator. Your installed Web Dominator should look like the below example.

Simply place whatever needs to be secured in the middle of the web dominator, and secure with the shock cord over the top, routed into the small tangs on the front lip of the dominator to secure it.