Introduction
The installation for the RAM 4th gen bedside racks have changed a bit based on customer feedback. The aluminum 'dogbone' mounts have been replaced by spacers to provide more room for error during drilling. See our written installation guide (link below) for complete details.
Install Time & Difficulty
60 - 90 minutes
Hard
Tools
3/8” Socket and Wrench
9/16” Socket
5mm Allen Key
Flat head screw driver for prying
Impact driver or power drill
3/8” drill bit
Smaller drill bit for pilot hole
Exacto or Utility Knife
Rivet nut installation tool (optional)
Painters Tape (optional)
Instructions
Please click the following link for a .pdf of latest version of this installation.
Video Install Guide
Note, this installation has changed slightly since the video was filmed, based on feedback from customers. The above PDF is the most up to date version of the installation instructions.
Comments
0 comments
Please sign in to leave a comment.