110036 | Perfect-Fit Stubby Antenna | Jeep Wrangler & Gladiator (2007-2023)

Introduction

This product is not intended to be a higher-performing replacement for the factory antenna. It is recommended for use if you have a strong signal with the stock antenna or simply don’t use your AM/FM radio. Returns accepted without question if the antenna doesn’t meet your expectations.

Install Time & Difficulty

5 minutes

Easy

Instructions

1. Unthread your stock antenna. If your antenna is being stubborn, you can try a shot of PB Blaster or penetrating oil in case the threads are corroded, but you'll want to make sure you remove any excess oil/lubricant from the paint.

2. Then thread our Stubby Antenna to finger tight.

CAUTION:

Many other antennas are advertised as being 'theft proof' because the manufacture includes thread locking compound to be used with installation. We can't overstate this - DO NOT USE THREAD LOCKER WHEN INSTALLING AN ANTENNA. We have seen horrific damage done to trucks by thieves trying to steal an antenna or by owners trying to remove an antenna installed with Loctite or similar. Neither of these are worth the $20 something dollars it costs to replace a stolen antenna.