Introduction
Installation of the Bedside Rack System is quick and easy for the 2019+ Ford Ranger.
Install Time & Difficulty
10 - 20 minutes
Easy
Tools
T40 Torx
7/16 Wrench
3/8in Wrench
4mm Allen Wrench
Ratchet w/ extension
3/8in Socket
Instructions
1. Using a T40 torx bit, remove each of the tie down loops and set them aside.
2. Next, remove the rubber covers plugging the oval shaped holes in the bed.
3. Install the machined aluminum tie down mount blocks and brackets.
4. Install the rear panel and loosely bolt into place using OEM hardware.
5. Loosely install the front panel using OEM hardware.
6. Bolt the two panels together using the included stainless bolts.
7. Tighten all hardware and you're done.
Comments
0 comments
Please sign in to leave a comment.