Introduction
Installation is very straight forward. The main panel is then attached to the upper anchors and the lower bracket on each side. The benefit to this is that remove of the panel is done by loosening the upper bolts and remove the two lower bolts. The lower bracket can stay in place. This is ideal for those who need to remove the panels for any reason, including to remove or replace the hard top.
Install Time & Difficulty
10 - 15 minutes per panel
Easy
Tools
1/16in Allen Wrench
5/32in Allen Wrench
10mm Socket
13mm Socket
Ratchet
T50 Torx
Pick/pry tool
Instructions
1. The first step is to pull out the rear subfloor, which requires removing each of the rear tie downs.
2. Then, the lower brackets slip under the rear tie down locations.
3. The subfloor is replaced and then the tie downs are reinstalled.
4. Then, simply loosen the two upper mounting bolts, slip the panel into place, install the two lower mounting bolts and then snug up the top.
Video Install Guide
Related Content
102604 | MOLLE Compatible Cargo Panel - Large Driver/Passenger Single | Ford Bronco 4DR (2021+)
Comments
1 comment
The video was great! I installed both side panels on my Bronco in just under 30 minutes. I love how they look, and am very happy with them!!
Please sign in to leave a comment.