Introduction
Follow along in our below linked install guide for the installation of the 102002 panel. Installation is covered in a segment of this video. Hardware included. If you have any questions, please contact us.
This part is used in both of the following 4pc kits:
102010 | Bedside Rack System | Ford F-150 & Raptor (2021+)
102005 | Bedside Rack System 4 Panel Kit | Ford F-150 & Raptor (2015-2020)
102014 | Bedside Rack System - 4pc Kit | Ford F-250, F-350 (2017-2022)
Install Time & Difficulty
5 - 10 minutes
Easy
Tools
T30 Torx bit
Front Panels
- Locate and remove the 4 bolts and Boxlink plate on the front of the bedside. If your truck doesn’t have standard Ford F-150 Boxlink plates and has four non-threaded holes, use the included thread-forming screws to create threads.
- Loosely mount the rear panel using the 4 boxlink mounting holes. The factory or BuiltRight Boxlink plates can be mounted on top of the bedside rack mount.
- Tighten all bolts.
- Repeat on opposite side
You're done!
Video Install Guide
Related Content
102010 | Bedside Rack System | Ford F-150 & Raptor (2021+)
102005 | Bedside Rack System 4 Panel Kit | Ford F-150 & Raptor (2015-2020)
102014 | Bedside Rack System - 4pc Kit | Ford F-250, F-350 (2017-2022)
102001 | Bedside Rack System - Driver Rear Panel | Ford F-150 & Raptor (2015-2020)
102004 | Bedside Rack System - Passenger Rear Panel | Ford F-150 & Raptor (2015-2021)
102003 | Bedside Rack System - Driver Rear Panel | Ford F-150 & Raptor (2021+)
Comments
0 comments
Please sign in to leave a comment.