Introduction
Follow along in our below linked install guide for the installation of the 102604 panel. Installation is covered in a segment of this video. If you have any questions, please contact us.
Install Time & Difficulty
10 - 15 minutes per panel
Easy
Tools
1/16in Allen Wrench
5/32in Allen Wrench
10mm Socket
13mm Socket
Ratchet
T50 Torx
Pick/pry tool
Instructions
1. The first step is to pull out the rear subfloor, which requires removing each of the rear tie downs.
2. Then, the lower brackets slip under the rear tie down locations.
3. The subfloor is replaced and then the tie downs are reinstalled.
4. Then, simply loosen the two upper mounting bolts, slip the panel into place, install the two lower mounting bolts and then snug up the top.
Video Install Guide
Related Content
102606 | MOLLE Compatible Cargo Panel - Full Kit | Ford Bronco 4DR (2021+)
Comments
0 comments
Please sign in to leave a comment.